William Isley and Ray Hardy introduce the data and tools that support various aspects of the redistricting process.
00:01 Alright. Well, good morning and welcome to the Esri redistricting offerings, an introduction.
00:05 My name is Ray Hardy, and I have with me Will Isley, and we will be taking you through the next hour and 15 minutes…
00:10 …showing you the Redistricting Online product that we have.
00:14 Just out of curiosity, how many of you have done redistricting so far?
00:19 How many of you are interested in redistricting in the future? Alright.
00:24 And how many of you are considering other applications? Alright. Good to know. Thank you.
00:31 Alright, so let's move on to the next slide, and I'll give you an overview of what we're going to be covering today.
00:37 So the first part of the session is an overview of what the product can do, what we've got in it…
00:43 …how you might want to use it, kind of the ideas of it, the vision, and then we'll go into demonstrations.
00:49 So we're going to demonstrate a subscription service for a single user, and then we're going to demonstrate a managed solution…
00:56 …or a managed service, hosted service, that a county, a city, a state might have open.
01:02 So I've got two or three of those to show you as well.
01:05 And then we're going to start talking about the architecture overview, so Will will guide you through that discussion.
01:11 And then we're hoping we have enough time, we're going to do a look ahead to see what we were thinking about in the future…
01:17 …and then we'll open it up for questions at the end.
01:19 So it's kind of…it's got a lot of information to show you in a short amount of time.
01:23 So without further ado, I think we'll just get started now.
01:27 So the first part is the product overview and some ideas about the Redistricting Online solution from Esri.
01:35 We built this to support collaboration between our users, our government, and our cities, and citizens of those cities.
01:44 So we wanted something that had the ability to have…that was easy to install, i.e., a web browser is pretty easy, right?
01:52 Everybody knows how to open that up and use it. So we wanted something to be able to use like that.
01:58 Something that doesn't have a lot of data management issues that we'd have to consider, so the data's already assembled for you.
02:05 Easy to use, anybody could use it, anybody from the novice user to an advanced user would have some access to it.
02:12 We wanted to have reporting, comments, and be able to submit plans online as well.
02:18 Specifically for our solution, we wanted to add some value beyond what it…
02:26 A lot of the solutions are desktop based, and this solution is online.
02:30 So what we wanted to do is to have the data preassembled.
02:34 So in our solution, whether you're working in Hawaii, whether you're working in Maine, whether you're working in Texas or California…
02:40 …you can go in, the data is preassembled for you, so it's 2010 data or 2000 data.
02:46 Data is preassembled; the TIGER has already been joined to the PL 94-171 data.
02:51 The system requirement that you'll need is a web browser. You'll also need to have a Flash player on it…
02:57 …and it's a good idea to have Adobe Acrobat Reader, but those aren't really hard things to get ahold of these days.
03:03 And we wanted something that has a reduced learning curve, so you could sit down…
03:08 The goal is you could purchase this, sit down that afternoon, and start working with it…
03:12 …and I think that's what we've created for you to see today.
03:15 We also wanted a centralized data management system, so instead of having to store stuff locally, trying to manage all that…
03:25 …you can store the data in the solution. And so wherever you happen to be, in a portable situation, which we're in…
03:33 We can do it here at the UC, we could go across the street at the Starbucks and work with this…
03:38 …we could be at city council meetings.
03:39 We could be anywhere we need to be, even at home, working on this in a very private place if we wanted to.
03:45 And that's what this is all about. Next slide.
03:48 So a little overview and vision here.
03:51 There's different places where each one of these groups fit in, but at the base of it all, we want to be able to…
03:58 …everyone needs to be able to create, edit, and publish data with the redistricting solution.
04:04 That includes the public, advocacy groups, and state and local government and officials, and their citizens.
04:11 Traditionally, this has been done with Desktop.
04:12 We're working with the web to do this, and we're using ArcGIS.com as a mechanism to do a lot of our sharing in this.
04:21 So in addition to those, we have reviewing and collaboration that we want to add in…
04:25 …and we feel like the online solution provides just that mechanism to be able to furnish that solution to you.
04:34 Alright, so our features that we support in this application. We'll go through all…
04:40 I'm not going to go through every bullet over here, because we're going to actually do a lot of the demonstrations…
04:43 …but this is kind of the stuff that you'll see today--charting and reporting, markup.
04:48 So remember redlining in the past with a grease pencil and an overlay? We've kind of put something like that in here.
04:55 We've got plan comparison and thematic mapping. We've got all of that embedded in this solution.
05:01 So what we're going to do now is move on to the next slide…
05:04 …and take a look at some of the redistricting data layers that we have in place for you.
05:10 So we look at that in two ways--geographies that we support and the census data that we support.
05:16 For our geographies, we support the state, county, and city; city in 2010, not in the 2000 data.
05:25 State and counties are supported both in 2000 datasets and the 2010. And the way…
05:31 You can see over on the right side if you were creating a new plan, you would just go over and create which year you want to use…
05:37 …2000 or 2010, and then you would pick the level, the starting point, the states, the counties, or the cities and towns.
05:45 So it's pretty simple to get started.
05:47 In addition to those redistricting layers, we've also got census data, and that's the PL 94-171 data that you're used to…
05:56 …that you're probably used to hearing about or you've talked about in your groups.
06:00 This is the data that has the counts of all the population. We have that for 2010 and 2000.
06:08 And you can see the Demographics window there; those are set up into different folders.
06:12 So standard would be your traditional values--white, black, non-Hispanic, all of those different layers...
06:19 …and then we've got the Office of Management and Budget, those variables…
06:24 …and custom variables and also voting age population variables. Next slide.
06:30 As far as working with your redistricting plans, so we have some data hierarchies to follow…
06:35 …you can do the state, county, tract, block group, and block, so that's one level that you could go about this, one way.
06:43 Another way would be to go state, county, VTD, and block.
06:47 And then if you're working in a city, a place, you can do the place and then go down to the block assignments.
06:54 [Audience question] What's VTD?
06:55 But as we look through here, you've got the American Community Survey data.
06:59 You've got voter registration information, general election information, so forth and so on all the way down.
07:06 And there's some custom variables in here as well. So total deviation was one of their custom variables that they put in.
07:12 So we could add any one of those in, so let's say we want to put in the voter party.
07:17 You could turn that on, and now it would add that in as a field on my district statistics to look at.
07:27 Alright. So that's the custom side of the demographics and the reference layers.
07:34 The other thing that would normally show up here would be the Submit tab, but since we're past the deadline to submit the plan…
07:42 …we can turn that off so that the submission process can end as the process of redistricting…
07:49 …for citizen engagement comes to a close for them.
07:52 Alright, so that's the LA County website, and I'm going to go back to Will here for just a moment.
08:00 Or actually, I'm not; I'm just going to talk through this.
08:03 So the next thing I want to do is to open up a default plan, and I want to do that in the San Diego redistricting application.
08:14 So I'm going to pull up my San Diego application, so this is another custom website, or managed website that we have.
08:21 And I'm going to log in this time as Ray Citizen. So it's processing my request, and I'm going to log in.
08:36 And you can see one of the nice features of this solution is that when I first come into this…
08:42 …I have the ability to look at a template plan…
08:44 …and I can look at the current council districts or the unassigned, blank district map.
08:50 So I can choose either one of those. I'm going to go ahead and choose the current council districts, and I'll click OK.
08:58 And it's going to open up that plan.
09:00 What we're going to do with this is we're going to assign some geography…
09:04 …and then I'm going to create a group and I'm going to show you how to share among…in a group.
09:09 So the next thing I need to do here is move over to the Create tab.
09:13 I'm going to close my District Statistics window, and I'm going to zoom in.
09:20 So the scenario I'm going to set up here is that district 3--so you all are pretty familiar with this area by now, I'm sure.
09:29 So district 3, this is Balboa Park, here's the San Diego International Airport, and we're basically right down in here.
09:38 So what I want to do is, for my plan…
09:42 …I want to potentially move district 3 further west and include the area up until the interstate here.
09:49 So I'm going to go ahead and just make that assignment, so I'm going to assign that to district 3.
09:58 So I'm going to do this very coarsely, so it's not going to look perfect.
10:07 Probably break a few redistricting processes along the way.
10:15 There we go. Now I've isolated that district, so I'm going to close that up.
10:23 Alright, so I've modified the district for district 3, and now what I want to do is go in and save this and be able to share it with…
10:33 …another user so we can do some collaboration.
10:36 So I'm going to save my plan; I'm going to save it as District 3…oops. District 3 Expansion.
10:49 And I can select it, copy it, and paste it into my description.
10:53 I'm going to go ahead and save it in a folder that I've created for UC.
10:57 I could always create a new folder here if I want to put my plans in, so if you're doing different things for different areas.
11:03 Click OK, and I'm saving this plan, and now the interesting part of this starts to develop, right?
11:10 Now I've created something, I've made a change to it, but now I want to collaborate with someone else.
11:15 So the way I'm going to do that is I'm going to share.
11:19 So I'm going to come over here to the Share tab.
11:21 And notice that some of the buttons you saw on the other applications, they're not always the same.
11:27 So we have the ability to control that, and that's called privileges; we'll talk about that in a few moments.
11:31 So I want to share my plan, but first I'm going to create a group to share my plan in.
11:36 So I'll click Manage Groups, and I'm going to create a new group.
11:42 The group I'm going to create is going to be called UC Demo, and I'll just copy and paste that down below.
11:58 So I'll create this group, and you can see now that it shows up here.
12:02 I'm the owner of that, of that group, and I'm currently the only member of that group.
12:08 So now what I'm going to do is go in and add some additional users, so for instance, let's pick on Will here; I'll add him in.
12:18 I'll do a search; there's Will. So I'll send him an invitation, "Hey, Will, I want you to join this group and see what I've done."
12:25 So here it is. I'll put him in there. I'm going to also add in a couple more.
12:29 So I'm going to put in another login that I have; search for that one. I'll add in my…my invitation to me.
12:44 And then I will find another one that I created. This one'll be Citizen 2.
12:54 I had to come up with something, so I know they're not that dramatic.
12:57 So I've got these three members that have outstanding invitations.
13:01 If I ever don't want one to be in there, for instance, maybe I decide I don't want to invite this to Will after all…
13:07 …so I can select that, cancel that invitation to him, and now he is removed from that invitation.
13:12 Also, if he is a member, once he signs in and accepts the invitation, he will become a member over here on the right side…
13:18 …and I would be able to see that, and I always have the ability to remove those users.
13:23 So I'm going to close that, close this window, and now I'm going to go to actually share.
13:30 So instead of sharing with everyone, I'm going to choose members of my UC Demo group…
13:36 …and I'm going to open it up to be able to read and write to my plan. Okay?
13:43 So I'm going to click Update. I have now shared my plan, and I can validate that by coming over here and looking in…
13:52 …and seeing that my plan is now shared; I have UC Demo…
13:55 …and there's my District 3 Expansion that I just created with read/write privileges.
14:03 Alright. So the next demonstration I'm going to do is I'm going to go in and log in as another user.
14:12 I'm going to accept that invitation, then I'm going to make some additional edits to this plan and do some markup…
14:19 …and then I'm going to save that out again. Okay?
14:24 So this time I'm going to go and log in as my Citizen 2, and I'll start out with the current council districts.
14:43 Notice that when I log in to this application, I see that I have an invitation.
14:50 So I'll come up here and see what that invitation is. So it says, Hey, the group UC Demo has invited me to join.
14:57 So I'm going to go ahead and accept that invitation, click OK, and I'll close that up.
15:04 Once I do that, I can come over and open the plan, and I'll come down to Share Plans…
15:11 …and now I have UC Demo showing up, and there's the plan, District 3 Expansion.
15:17 So I'm going to click that, and that's the plan I want to open up, because I'm going to do some more work.
15:22 It tells me that I'm opening a plan that's shared and that I can click Yes and the plan will be locked while I'm working with it.
15:30 So I'll go ahead and click Yes. And I want to open it up; it's locking my plan.
15:42 Now I know traditionally you would be concerned about the exact statistics and everything...
15:45 …but I want to show you some of the features of editing and how that would work, so…
15:50 I'm going to close my District Statistics window, and then I'm going to zoom in here.
15:54 I can see that change that I've created…
15:58 …and I can see that district 3 is now exactly how I assigned it as the previous user, the Ray Citizen user.
16:07 So what I'm going to go and do, though, is I'm going to add some input.
16:12 So from my perspective, district 3 would be great, but remember when you flew in to San Diego today…
16:19 …or this week when you came in, if you did, that when you fly in a lot of times you fly right in over Balboa Park.
16:26 And so maybe the citizens, maybe what I understand from my perspective, it would be better to have the southern part…
16:31 …of this area be part of district 2, so I could maybe have some input about the air traffic flying low and over my district area.
16:40 So what I'll do is offer that input.
16:43 I'll say, You know what, I'm going to draw a line; I'm going to show them where that flight path is…
16:47 …because I don't think that person quite understood. So I'm going to draw my flight path now.
16:51 I hope the plane you're flying on doesn't zigzag like this, but let's say it does.
16:55 So here's the flight path. I'll add in some text, so I'll put that information right here, right-click over it.
17:04 I'm going to edit it. I'm going to say, "San Diego flight path." Okay? So that comes in there.
17:25 I think I'm also going to change my line from being blue; I'm going to change its color to red so you can see it in the back.
17:33 So now I've got the flight path coming in, and that's going to be my justification for saying what I want to do next…
17:40 …which is I want to modify this district and assign the southern part into district 2 again.
17:49 So in order to that, what I'm going to do is just real basically here, I'm going to draw a box and put that area back into district 2…
18:03 …where I think it needs to belong, and I'm going to add in a comment…
18:11 …that says, "Southern…southwest district 3 modified for air traffic."
18:34 Okay? So I'll add that comment, and that comment will populate in here; it tells me the time and the date that I pushed it through.
18:42 And then I can close this up. Going to go ahead and save my plan again.
18:48 I'm going to save this as another plan; I'm going to say…first I'm going to save it back here…
18:54 …and I'm going to call this District 3 with Modifications. Okay?
19:07 And I save that back into my UC folder. Okay?
19:24 Now, when I save that over, those two…what I've just done is I've created actually a second plan.
19:34 But let's say that I want to go back now, and the next demonstration what I'm going to do is go back and show you…
19:40 …how you can take this input and review the two plans together. Okay?
19:47 So I'm going to open this next plan up as a reviewer.
19:51 Notice that when I go onto my Review tab, there's a gray space here. This is for our plan comparison area.
19:57 So what I'm going to do is log out, or actually, I'm going to log in as another user, so as the admin user.
20:09 And I could go ahead and submit this plan; maybe I think that what I've modified works.
20:15 So this is from the Citizen user. I'll submit it.
20:18 It first wants me to ask some information about it, so it's telling me that once I submit it, I can't do anything different to it.
20:24 I'll have to put in a phone number for it.
20:32 So I'll put that phone number in, and then I could go and submit the plan, and I can click OK.
20:41 Now, the plan was submitted, so now I'm going to go over, and as my administration user, I'm going to log in.
20:56 Start with my council districts, and now what I want to do is to come over and open up some of these shared plans.
21:10 Oh, the first thing I need to do, too, is to accept my invitation, so I'll accept that invitation, close that.
21:25 And now I'm going to come over here and look and see that my plan is shared.
21:34 So this is going to be the original one, the District 3 Expansion.
21:50 And I'll come back in here and zoom in…oops…and what I'm seeing is, I've got just the edits that I did the first time.
22:03 So my second citizen didn't share back to the same group, right?
22:08 So what I can do is go back and I will share this plan, share it to my UC Demo group.
22:25 It's a read-only, and I'll update that. Whoops.
22:34 Here we go. I'm going to load that plan in now.
22:37 So I want to overlay this and be able to see the differences.
22:42 So I'm going to come over here to the Review tab, and as an administrator, I have this privilege called plan comparison and merge.
22:50 And what I'm going to do is load in that shared plan now. Think I might need to exit first. Just one moment.
23:26 So I'm going to load in the first plan; that should now be shared.
23:35 There it is, District 3 with the modifications that I put in there.
23:43 I'll open that and I'll zoom in.
24:01 We'll try that one more time. There we go; there's that one.
24:08 Now I'm going to go back here, since I've now shared that other plan, and I'm going to open a second plan on top of this…
24:21 …this will be the original starting plan--and you'll be able to see how they vary. So this is pretty neat.
24:31 So when I see this up close, at first, you know, it's hard to see, but I'm going to come in, zoom in.
24:39 I'm going to have the ability now to see, I can see where the two plans are overlapping.
24:48 You see how that shows up with the…I don't know if you can see this in the back or not.
24:53 But you can enhance this, so I can see where one district is, fade it out…
24:58 …and then I can turn the other district on and make it brighter.
25:06 So I can kind of slide between them, and then you can see the crosshatch here where the two districts are in conflict.
25:14 So what I can do then is I can decide, if I wanted to merge, I could say the area in conflict would be unassigned.
25:20 I can move it to the active plan, or I can move it to the comparison plan.
25:25 So I have a decision to make, and I can make it another plan or save it to the original that I'm starting to work with.
25:31 So that's how that's going to work.
25:34 And I can make those decisions, and that's how we can do our reviewing.
25:39 Alright. Think that's all I had for this part. Yeah. So we're going to switch slides.
25:52 So this slide here, we talked a little bit about, or I mentioned a little bit about our user system roles.
25:58 And our system roles are created so that, when you log in, you have a certain level of privileges that are assigned to you.
26:07 And the roles would be something like the plan submitters or the citizen role, which you see on the right side of the screen.
26:13 Then a plan reviewer might take something that someone's drawn, they go in and kind of do what I just showed you…
26:19 …the plan comparison where they kind of look between the two plans, see where they're different, see how they're the same.
26:25 And then editors and administrators, the privileges go up.
26:30 So you can take away privileges from the citizen user because you may not want them to be able to do plan comparison…
26:36 …or you may not want them to have some restrictions on how you zoom in and out, how you can lock and unlock things.
26:42 All of those buttons, a lot of those have privileges associated with them.
26:47 So I'm going to demonstrate the administration console that a managed solution has in the application.
26:53 So I'm going to switch back over to my screen.
26:55 And to do this, I'm going to log in; this is the San Diego…this is the administration console for the box we were just using.
27:04 And I'm going to log in; I'm going to go in as my administration account, and I'll log in again.
27:15 And it's a pretty simple menu that you can see, so this would be something that only the administrator would see of that organization.
27:23 So the first thing I could do is look at the different users I have.
27:30 I could add a user if I want to create one of my own.
27:34 When I create a user, you can see that the default that they have is citizens membership…
27:39 …and they have two other levels of membership that they could have.
27:42 I could add that over, like power user. I can also remove that privilege.
27:51 I could export my users to a CSV file; maybe I want to have that as a different log or keep track of it in a different database.
27:57 Some of our customers have asked for that.
27:58 And then, more importantly, I can come down here to my roles, and I can view the roles.
28:04 So right now, we have the administrators, citizens, and power users roles.
28:09 The administrators have full access, so I can come in here and click Edit--that's the pencil…
28:16 …and I could change the name of this description if I want.
28:19 I can see who all the users are, so I could go in here and see my admin role; I could remove my ability to have that control.
28:31 But what's most interesting on this page is what's at the bottom, and that's all of the available privileges.
28:37 Now for the administrator, of course they're going to have all the privileges, right?
28:40 'Cause that's the person who you want to have that.
28:43 So all of those are over here on the right side. Let me go back up, and let's go in as a citizen and see how it looks different.
28:54 So when you go in as a citizen, you see that there's a lot of privileges that are disabled, so…
29:04 …and there's a lot of privileges that they have.
29:06 So notice that on the San Diego one that I'm using, as a citizen, when I come over here to Review, I don't see the plan compare…
29:14 …plan merge--I'm sorry. Plan comparison and merge feature.
29:18 That feature is called Compare Plans; there's that feature.
29:26 If I want to enable that for that set of users, for the citizen role, I can click Add…
29:31 …and now they have that ability, once they log out and log back in, so…
29:36 Since I modified it, I'll move it right back over.
29:38 This is not their live box, by the way; I'm showing this for demonstration purposes.
29:45 I think I put it at the very bottom. Alright, so I'll click Cancel and not save that, and go back to the main menu.
29:53 And that gives you an idea of how the privileges work when you're trying to work with a managed solution.
29:58 I'll log out, and I'm going to hand it back over to Will for just a moment.
30:03 Thought you might want to see who some of our users are of our software.
30:08 So at the state level, we have several states listed here--Alabama, Utah, Hawaii, and DC.
30:15 Counties--San Bernardino County, it's one of the largest counties in America…
30:20 …the County of Los Angeles, you saw their web application, and we just looked at it; Salt Lake County.
30:25 And then our cities, we have the City of San Diego, City of Fort Worth, and Sacramento, and we've got a few more in the queue.
30:32 So let's move on to the next slide. I think this is back to Will.
30:37 So earlier we covered the different deployment models and what they were.
30:41 If you choose to go with the managed services deployment model…
30:44 …we just wanted to highlight some of the features that come with that.
30:47 So if you go with managed services, the infrastructure's all handled for you by Esri.
30:52 We take care of the hardware, the software, the network, the security, and the facilities. You don't have to worry about that at all.
30:57 We create two deployment environments, one for staging and one for production.
31:01 We set up the staging environment, configure it the way you told us to configure it, add in the data you wanted…
31:05 …add in the reference layers, configure the roles and privileges, and then once you validate that it is the way you want it…
31:11 …we then move it to a production environment, and that's the environment that end users would actually use.
31:16 We take care of data management, we take care of the database, we do backups.
31:21 We support two updates to the system with the default contract that we set up, but you can amend that if you want to change it.
31:30 And then there's three tiers of technical support.
31:32 We have a general help desk, one with environmental support, and another with application support.
31:38 And along with this, we have monitors on the database and the application and the services…
31:41 …so if things, if things hiccup or go offline, we autodetect it and fix it.
31:48 With the on-premises deployment, what we do is we schedule in one week of deployment prep…
31:54 …where we get on a teleconference with you; we sketch out the system's architecture…
31:58 …what architecture's going to meet your needs, what machines you need, how the network will look.
32:03 And then following that, we do a week of deployment.
32:06 We can do this shadowing your system admin, or they can shadow us while we do it…
32:10 …and we'll load your data, we'll deploy the application.
32:13 We'll test and verify the deployment's valid, and then we can give you training and documentation.
32:18 After that, we give you a week of follow-up support.
32:23 Now I want to give you a little bit of an architectural overview of the solution.
32:27 So you can see here, the client of the solution is just a web browser with a Flash player.
32:33 In this box on the left-hand side is the solution itself; that's ArcGIS Server and the redistricting services and the data tier.
32:40 If you choose an on-site deployment or a managed deployment, that's the part of the solution that's taken care of.
32:46 So in the ArcGIS Server tier, we give you a runtime license of ArcGIS Server to support the solution.
32:51 We also give you a runtime license of ArcGIS Workflow Manager Server…
32:55 …which is a COTS product that we built the redistricting solution on top of.
33:01 We also deploy the redistricting services for you.
33:05 Below that is the data tier; that's the census data and demographics. I'm going to go into that in a bit.
33:10 And also our plan management database.
33:14 On the right-hand side of the diagram is ArcGIS.com, so this is a service that Esri hosts for everyone, and it's free to the public.
33:22 So if you choose to publish your plans, it goes into that domain, and then the public or whoever you share your plan with…
33:29 …can search for it, review it, and add basemaps to it and build maps from it.
33:37 In the data tier, we have the census data, which we store as a file geodatabase.
33:40 It has the tracts, block groups, counties, VTDs, and all the tied demographics with it…
33:45 …and that's what we publish up as a map service to support the solution.
33:48 We also have a redistricting database. That's built on top of ArcSDE and PostgreSQL.
33:53 And the reason we chose Postgres was the licensing. It has a no-cost licensing with it.
33:59 We use that database to store district plans, users and groups, and plan access.
34:04 Along with this is the custom data package, so if you purchase a managed or on-site deployment…
34:10 …you can add in your own data or reference layers.
34:12 Anything that can be served up as an ArcGIS Server map service, a file geodatabase, a shapefile…
34:18 …or, if you're on-site, it can be an SDE layer, can be used for reference data.
34:25 So I want to take a moment to give you a little bit of look ahead, some of the things that we're working on, that we're in progress with.
34:31 Currently, we're working on a redistricting portal.
34:33 For those of you that have seen ArcGIS.com, this is a tailored experience to ArcGIS.com specifically around the redistricting domain.
34:41 We're also building a districting…district plan viewer to augment that offering so that when you search for and find a district plan…
34:48 …you can open it in this viewer and do charting and reporting and analysis without having to be in…
34:54 …without having to be in the Redistricting Online application.
34:58 We're also going to enhance our district plan publishing to support publishing the map services…
35:03 …out of the Redistricting Online solution so that those services can be consumed…
35:07 …in any viewer that can consume an ArcGIS Server map service.
35:12 And we're also working on election management.
35:15 So to give you a demo of some of this stuff, I just want to set the stage that this is software we're working on…
35:20 …so if you see a glitch here and there, just keep in mind, it's still being developed.
35:24 But what I want to show you is the portal; I want to show you the gallery of district plans--I want to show you how to search it…
35:30 …and then I want to show you the district plan viewer and doing some charting and analysis.
35:38 So here's our portal. You can see the experience is much like ArcGIS.com except it's tailored around redistricting.
35:44 You can find and search for district plans, you can manage your groups, and you can add and share district plans.
35:53 Now keep in mind, this is a tailored experience around ArcGIS.com…
35:56 …so all of this information is actually stored in ArcGIS.com and accessible there as well.
36:02 The reason we created the tailored experience is so that you're not…
36:04 …so that your experience is not obscured with other data that's not related to redistricting.
36:09 So I'll show you the gallery. And so these are some recent plans that have been published to our redistricting portal.
36:20 You can see the State of Alabama has one in here; the State of Arizona; Washington, DC, and the District of Columbia.
36:27 But what's really interesting is the ability to search once these things have been published.
36:30 So if I search for DC, I can find a DC plan, then I can open it.
36:37 Another distinction of this portal over ArcGIS.com is we have this district plan viewer.
36:42 So if I click to open this plan up in the district plan viewer, it'll launch a user experience much like Redistricting Online…
36:49 …the editor that we have, except this is restricted to a read-only view of the plan…
36:54 …so you can do analysis and charting and reporting.
37:00 Move this up here. Here we go. And there's the district plan.
37:05 And again, this is a free experience; this is through ArcGIS.com.
37:09 This is not the district plan editor that Ray and I have been showing you.
37:13 And you can inspect your district plan on a number of different levels.
37:16 You can see we have charting and reporting on the demographics, so if I want to select one of the demographics…
37:21 …I can select black population, you can see the charting for that, how it's distributed amongst the districts.
37:26 You also get a histogram of this, and these histograms are easier to read if you make them bigger.
37:37 You can see all the different demographics in a histogram.
37:39 Obviously, this is a contrived plan to demonstrate to you, because the population is not balanced at all…
37:45 …but you can get an idea of the charting capabilities.
37:48 And then you can actually export these out to images…
37:50 …if you want to embed them into PowerPoint presentations or something like that.
37:53 You can also see you get the district statistics table. You get the ability to navigate to each of the individual districts.
38:00 You can turn on your district drop line just like you could in the online editor.
38:05 You can even do redlining; you can mark it up, so if you want to inform someone of an issue with the plan.
38:15 Same redlining capabilities that we had in the editor.
38:23 You can add in your own content. You can upload a shapefile, you can upload an Excel spreadsheet.
38:29 You can even search for services on ArcGIS.com and add them in and mash them up to this view of the district plan.
38:35 You can run compactness tests. For those of you that are familiar with Schwartzberg and Groffman and the Reock test…
38:42 …you can run analysis against your district plan compactness.
38:45 You can run the reports that we had in the online solution. The subset of reports that are supported are listed here.
38:54 We can't do all of the reports because we don't have the backing census data with this particular hosted solution…
38:59 …but you just select the demographics that you want, click OK, and there's a report on that district plan that was published.
39:10 You can even do plan comparison. This feature's still being worked; I can't demonstrate it to you right now.
39:20 So that brings our demonstration to a conclusion. If you want more information, you can visit our resource center.
39:25 There's a link up there; you can copy that down and visit it.
39:29 I want to mention that for our subscription site, we do offer a 30-day trial.
39:32 You can log in and use the software free for 30 days and evaluate it before you purchase it if you'd like to.
39:39 There's a support alias for it, and that support alias is email@example.com.
39:44 There's the phone number for sales, and if you want more information, you can stop by and visit the Managed Services booth…
39:50 …though the UC's coming to a close; there's a very limited window to go do that, so…
39:55 Now we want to open up the floor to any questions that anyone might have.
39:57 Does anyone have any questions? No? Okay. Well, thank you for coming.
40:05 And for your time.
© Esri 2013 http://www.esri.com